Mido Replica Watches's new P.4000 proprietary automatic movement is the first to feature a decentralized winding-rotor. This feature is crucial because it allows for a significant reduction in the movement's size without compromising performance. A new model in the Radiomir 1940 range features a caliber that has a three-day power reserve. Mido Replica Watches Radiomir 40 3 Days Automatic is available in either red gold or steel housing. The two versions of the watch are different in terms of dial colors and straps, but also the level of finishing on the movement.
Mido Replica Watches Caliber P.4000: First of its Kind The brand's Neuchatel workshops produced the new P.4000 caliber, which is entirely made in-house. This is the first caliber of the brand to feature a micro-rotor that is not centered. This feature is important because the rotors are smaller than the diameter and they're shifted to the side.Mido Replica Watches The technical solution allows for a small weight to be placed directly inside the movement instead of over the top. The result is a caliber that has a thin profile with just 3.95mm of thickness. Its diameter is 31 mm, or 13 3/4 lignes.
The Caliber P.4000, with its 31 jewels, has a balance-cock that is secured with two supports. This is a very helpful feature, as it provides a much higher level of structural integrity than a single support. It is a variable-inertia balance wheel that operates at 28,800 Hz. The large bridge movement has a balancewheel with this frequency. It is equipped with screws which allow fine-tuning the rate of the movement without fear of disturbing the relationship between the balance spring and bridge. Caliber P.4000 comes with two barrels that are wound in parallel by the bi-directional, off-centered rotor. The twin barrels can store enough energy for the movement to run at least three full days when fully charged. The movement, which is made up of 203 pieces, also includes the KIF Parashock device to protect it from physical shocks.
There are two levels of finishing. As mentioned earlier, the novel movement is available in two different finishes. The steel model is less ornate and has a rotor winding made from tungsten alloy. It also features a relief decoration on a matte-finish surface. The bridges of this version are also brushed horizontally and have blue engraving. The caliber is also available in a red-gold variant with a micro-rotor in 22K yellow gold with a clue de Paris hobnail pattern. This motif is further enhanced with polished details that are raised on a brushed surface.Tudor Replica Watches The bridges have circular brushing and gilded engraving.
Radiomir 1940 3 Days Automatic Orro Rosso & Acciaio VersionsApart for being the brand's first movement to feature a decentralized rotor (Caliber P.4000), it is also interesting because this is the first self winding movement used in the Radiomir 1940 collection, which was introduced relatively recently and is often described by some as combining Radiomir with Luminor. Mido Replica Watches has named the first model that features the brand's very first caliber in two categories after its most prominent characteristics, the Radiomir 1940 3-Day Automatic. The names of these variations also include the Italian words for the case materials - Oro Rosso, which is red gold and Acciaio, which is stainless steel - at the end. Let's share some more information about the watch that debuts the new caliber.
